2025 Timpte F-4000 Heaped 9" 96" Wide AG 1587 ft3

Information

2025 Timpte F-4000 Heaped 9" 96" Wide AG 1587 ft3

No one knows dry bulk commodities, and how to haul them, like Timpte. For more than 135 years we’ve designed and built trailers to help keep America moving forward. We customize each one to meet the specific needs of those using it, and engineered the Timpte F-4000 Tender for hauling seed and fertilizer to the field faster with fewer spills and headaches. Backed by end-to-end service and support, every Timpte trailer is built to last longer.

Features may include:
  • Swinging Discharge Chute
  • EZ Flow
  • Thunder 7000
  • Flow Deflector
  • Sight Glass Windows
  • Discharge 4000 lbs./minute
  • Cleated Belt Design
  • Stainless Steel Conveyor
  • Controls
  • Vertical Hydraulic Cylinders
  • Lower Assembly Unit
  • Upper Assembly Unit
  • Aluminum Tarp Bows

Photos

Highlights

  • Grainfield, Kansas
  • 2025
  • Timpte
  • F-4000 Heaped 9" 96" Wide AG 1587 ft3
  • Available
  • 96” | Traps openings: 24”
  • 72”

    • Specifications

    • 2025
    • Timpte
    • F-4000 Heaped 9" 96" Wide AG
    • 1587 ft3
    • Hopper / Grain
    • One 4” x 8” viewing window size sight glass centered in each hopper
    • 40’ 0” | Traps openings: 26”
    • 72”
    • 96” | Traps openings: 24”
    • 20”.
    • All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
    • Side Lamps – Includes 2 rows of 3 – ¾” diameter LED bullet style marker lamps each side ;( 3) amber, (2) red, and 1 amber LED mid turn/marker lamp. | Nose Lamps – (2) High mounted amber ¾’ diameter LED bullet style marker lamps. | Standard High mounted Rear Frame Lamps (5) red ¾” diameter LED bullet style marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter 6 diode LED lamps, – all grommet mounted.
    • 23,000 lb. rated air ride suspension, 17” ride height, 71 ½” track
    • Ladder access: Aluminum ladder, handhold and platform are mounted on the front nose of the trailer. Aluminum ladder and handhold mounted on the rear of the trailer | Nose panels & front corners: Smooth pre-painted white .063” aluminum. Connections for air supply and control lines and electrical 7 way connection is mounted on the nose panels. Connection points for the hydraulic couplers for conveyor are also located on the nose. The front corners are 6” radius with stainless steel corner overlays. | Hoppers: High ground clearance tub design with formed .125 aluminum panels with side slope angle of 35.8 degrees and end slope angle of 33 degrees. Hopper opening is supported by a substantial structural trap frame extruded aluminum weldment. The front and rear slope panels have a slope angle of 33 degrees and are supported by extruded aluminum crossmembers. | Thunder Armor 18 oz. roll tarp system | Thunder 7000 single arm electric tarp opening system with heavy duty rear roll return, One Touch control system and Rf remote.
    • Side panels: Two rear panel assemblies constructed of corrugated pre-painted white .048” aluminum panels mounted to either side of the inclined conveyor assembly. | Center Panel – .080 aluminum supported by extruded aluminum bulkhead crossmembers. There is 12 ½” of ground clearance between the ground and the bottom of the conveyor system.
    • SS construction. Inclined conveyor extends 12’5” beyond the rear frame in transport mode for an overall length of 52’4”. Discharge height is variable between 11’6”‘ and 14’2”. Discharge speed is in excess of 4,000 pounds per minute depending on the weight of the commodity. Inclined conveyor can be shifted to the left or right 3’2”. | Belting: 2 Ply Rubber coated reinforced belting – smooth faced belt on lower conveyor and cleated faced belt on inclined conveyor
    • The system required a hydraulic power supply of a minimum of 20 GPM of flow at 2500 psi of clean, filtered oil.