2025 Timpte Tri Axle Heaped 9" 96" Wide AG 1,581 ft3 50 L

Information

2025 Timpte Tri Axle Heaped 9" 96" Wide AG 1,581 ft3 50 L

Designed and built in the Midwest, we understand how vital every piece of equipment is to your operation. Each Timpte trailer is custom built using American-made, high-quality materials to haul more, last longer and lower your cost of ownership. With more standard features and backed by end-to-end Factory Direct support and service, it’s no wonder Timpte is the #1 selling dry bulk commodity trailer on the market.

Features may include:
  • Aluminum Tarp Bows
  • Side Panels
  • Air Ride Dump Valve & Oil Filled Pressure Gauge
  • Upper Coupler Assembly
  • Trap System
  • Lights & Electrical
  • Access System
  • Rear Corner Frame Posts
  • Electric Tarp System: Thunder7000
  • Tarp: ThunderArmor
  • Tarp Bows

Photos

Highlights

  • Grainfield, Kansas
  • 2025
  • Timpte
  • Tri Axle Heaped 9" 96" Wide AG 1,581 ft3 50 L
  • Available
  • Traps: 26" opening supported by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal. | Mudflaps Black heavy-duty rubber: 24"
  • 66”

    • Specifications

    • 2025
    • Timpte
    • Tri Axle Heaped 9" 96" Wide AG
    • 1,581 ft3 50 L
    • Hopper / Grain
    • Support Legs Located 98” from Kingpin. | Hopper clearance 25”. | Tarp Bows: Nine (9) – 9” rise galvanized steel arch type on 48’ & 50’ trailers. | Traps: 102” wide trailers Add 6” to trap opening width. Hopper clearance 18”.
    • 48’ 0” | Traps: 54" opening supported by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal. | Mudflaps Black heavy-duty rubber: 30"
    • 66”
    • Traps: 26" opening supported by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal. | Mudflaps Black heavy-duty rubber: 24"
    • 20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
    • Heaped 9" AG 96" width: 1,581 FT3 | Heaped 9" Split 96" width: 1,726 FT | Water Level AG 96" width: 1,425 FT3 | Water Level Split 96" width: 1,570 FT3 | Support Legs: 50,000 lbs. lift capacity
    • Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
    • Side Lamps – Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.D. mid turn/marker lamp. | Nose Lamps – (2) High mounted amber L.E.D. lamps. | Standard High mounted Rear Frame Lamps – (5) red L.E.D. marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode L.E.D. lamps, grommet mounted.
    • 23,000 lbs rated air ride suspension, 17” ride height, 71-1/2” or 77-1/2” track. Suspension subframe long beams are 4” x 8” x 1/4” rectangular structural steel tubing and crosstubes are 4’ x 8” and 6” x 8” structural steel tubing. 10’2” axle spacing on 48’ and 10’8” on 50
    • Twelve (12) 24.5 x 8.25 white steel disc painted, hub piloted.
    • Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
    • Twelve (12) 11R24.5 radials.
    • 16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121. 4 sensor, 2 modulator anti-lock brake system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
    • Trap Operators: Each trap is opened and closed through a 2 speed gear box with a 1″ diameter shaft connected through a U-joint to the double rack and pinion gears using a removable crank. There are trap locks at each crankshaft. The double rack and pinion gears drive at both sides of each trap plate. | Access System: Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10" square cushion foot shoe, “No Lube” feature | Mudflaps: 3/8” Black heavy-duty rubber 24”W x 30”L. | Tarp: 18 oz. locking roll tarp with rear mounted crank. Three molded black plastic sidewall protectors. | Coatings: Black protective metal coating on all steel parts.
    • Side Panels: Pre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 6” radius, stainless steel | Side panels of .080” aluminum with side slope angle of 43.5 degrees. Center and end panels of .100 aluminum with slope angle of 33 degrees. Riveted split tub design. | Front and Rear End slope panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.