Better Built Trailers

Specifications

• 2025 Timpte Spread Water Level 96" Wide Split 1,905 ft3
• Year2025
• ManufacturerTimpte
• Model NameSpread Water Level 96" Wide Split
• Trim Name1,905 ft3
• Generic Type (Primary)Hopper / Grain
• DimensionsSupport Legs Located 98” from Kingpin. | Hopper clearance 25”. | Tarp Bows Nine (9) – 9” rise galvanized steel arch type on on 48’ & 50’ trailers.
• Length48’ 0” | Traps openings: 54” surrounded by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.
• Height78”
• WidthTraps openings: 26” surrounded by robust structural trap frame. The trap plates are 1/4”aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.
• Kingpin Setting20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
• Capacities
• Cargo CapacitySupport Legs: 50,000 lbs. lift capacity
• Electric
• ElectricalElectrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
• Lights and Safety
• LightingSide Lamps – Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D, (1) amber L.E.D. mid turn/marker lamp. | Nose Lamps – (2) High mounted amber L.E.D. lamps. | Standard High mounted Rear Frame Lamps – (5) red L.E.D. marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 6 diode L.E.D. lamps, flange mounted.
• Suspension23,000 lbs rated air ride suspension, 17” ride height, 71-1/2” or 77-1/2” track, with 28-spline camshafts. | Suspension subframe long beams are 4” x 8” x ¼” rectangular structural steel tubing and the crosstubes are 4” x 8” and 6” x 8” structural steel tubing.. 10’2” axle spacing on the 48’
• Wheels & Tires
• WheelsEight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
• Hub TypeCast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted.
• Tires, Rear SpecificationEight (8) 11R24.5 radials.
• Brakes
• Brake System Type16-1/2” X 7” “Q+” quick change brakes with 5.5” auto slacks and 30/30 spring brake chambers complying with FMVSS 121. 4 sensor, 2 modulator anti-lock brake system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
• FeaturesAccess System: Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10? square cushion foot shoe, “No Lube” feature | Mudflaps: 3/8” Black heavy-duty rubber 24”W x 30”L. | Tarp: 18 oz. locking roll tarp with rear mounted crank. Three molded black plastic sidewall protectors | Tarp Opener: Thunder 7000 electric tarp opener system with One Touch control and RF remote. | Coatings: Black protective metal coating on all steel parts.
• Construction MaterialSide Panels: Pre-painted white .048” and .063” aluminum, corrugated on 6” centers. | Lower Rails-Aluminum 9-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 6” radius, stainless steel | Side panels of .080” aluminum with side slope angle of 43.5 degrees. Center and end panels of .100 aluminum with slope angle of 33 degrees. Riveted split tub design. | Front and Rear End slope panels-.080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.